Fanuc A06B-0247-B101 αiF 22/3000 AC Servo Motor w/ Pulse Coder Used

*Please read full description prior to purchase*

**eBay policy restricts the display of phone numbers in the listing**

SELLING "AS IS - WHERE IS" AS DESCRIBED

** see all pictures**

Fanuc A06B-0247-B101 αiF 22/3000 AC Servo Motor w/ Pulse Coder Used

Up for sale is a used Fanuc Alpha iF 22/3000 AC Servo Motor, Part Number A06B-0247-B101, complete with its factory-installed Fanuc Pulse Coder A860-2005-T301 and shaft coupling. This heavy-duty industrial servo motor was removed from a functional CNC machine during equipment decommissioning and has been stored indoors since removal.

The motor is in good overall cosmetic condition with typical signs of previous industrial use, including light scratches and scuffs from normal operation. The output shaft turns smoothly by hand, the mounting surfaces are clean, and the pulse coder remains installed on the motor.

Please note: The green encoder cable attached to the pulse coder has been cut during removal and will require repair or replacement before the motor can be placed back into service. The coolant fittings remain installed as shown in the photos. No additional testing has been performed after removal from the machine.

This motor is well suited as a direct replacement, spare, or rebuild unit for compatible Fanuc CNC machining centers and industrial automation equipment. Please verify compatibility using the part number before purchasing.

Features

• Removed from a functional CNC system
• Genuine Fanuc Alpha iF AC Servo Motor
• Fanuc Part Number: A06B-0247-B101
• Integrated Fanuc Pulse Coder: A860-2005-T301
• Heavy-duty industrial construction
• Shaft coupling installed
• Coolant fittings included
• Clean overall condition with normal cosmetic wear
• Ready for installation after encoder cable repair/replacement

Specifications

• Manufacturer: Fanuc
• Series: Alpha iF
• Model: αiF 22/3000
• Part Number: A06B-0247-B101
• Type: AC Servo Motor
• Rated Output: 4.0 kW
• Rated Voltage: 230V
• Rated Speed: 3000 RPM
• Frequency: 200 Hz
• Insulation Class: F
• Protection Rating: IP65
• Country of Manufacture: Japan

Condition

Used. Removed from a functional industrial system. The motor has not been tested after removal. The encoder cable has been cut during machine disassembly and will require repair or replacement before use. The motor exhibits normal cosmetic wear consistent with industrial service. Please review all photos carefully, as they are part of the item description.

Includes

• Fanuc Alpha iF 22/3000 AC Servo Motor
• Integrated Fanuc Pulse Coder (A860-2005-T301)
• Installed shaft coupling
• Coolant fittings shown in the photos

Not Included:

• Servo amplifier
• Power cables
• Intact encoder cable
• Manuals or additional accessories

Compatibility

Compatible with many Fanuc-controlled CNC machining centers, lathes, routers, and other industrial automation equipment using the A06B-0247-B101 servo motor. Compatibility may vary by machine and control configuration. Please verify part numbers before purchasing.

Shipping

This is a heavy industrial component weighing approximately 75-90 lbs. It will be professionally packaged using appropriate packing materials to ensure safe delivery. Freight shipping or calculated shipping may be required depending on destination. Local pickup is also available.

Note to buyer:

1. Review all photos carefully as they are part of the description per eBay policy.
2. Items that are untested, for parts or repair, or unknown condition are sold as is and are non-returnable.
3. Items are sold as pictured. If it is not shown in the pictures it doesn't come with the item (i.e. power cords, attachments, tooling, etc.)
4. Most listings at the end include a GH and then a number for example (GH119) OR (A19) it is an internal stock reference number and not part of the item's description.

Thanks, Gearhead Surplus

Have Questions? 

Use the above Contact Seller link (on the right-hand side near the top of this page) which will take you to our Find Answers from Gearhead Surplus page to get our phone number.

Once on the Contact Seller Find Answers page please scroll down and select "contact seller". This will then take you to a page where you can either send us a message or call us. In order to find the contact number, look for the "You can also get the seller's phone number" link in the bottom right-hand corner. Once clicked, this will show the number to call.

Even though you can get our number this way, when you are using eBay's messaging system do not ask us for our phone number or give us your phone number since this is still against eBay's terms of service. Giving us your phone number via eBay's messaging system can get you/us suspended.